NEW DELHI: AIS-038 Revision 2 is the automotive standard relevant to traction-battery requirements for M and N category electric vehicles, including passenger cars in the M category. It should not be confused with AIS-156, which addresses L-category electric vehicles. Official ministry explanations set out both the category distinction and the battery protections tested.
| Reference | Purpose in the official framework |
|---|---|
| AIS-038 Revision 2 | Requirements for M and N category electric powertrain vehicles |
| AIS-156 | Specific requirements for L-category electric powertrain vehicles |
| Rule 126, CMVR 1989 | Prototype submission to a notified testing agency |
| IS 16893 Part 2:2018 | Reliability and abuse testing of propulsion cells |
Start with the vehicle category
A Heavy Industries parliamentary reply from December 2022 describes M-category vehicles as having at least four wheels and carrying passengers, and N-category vehicles as carrying goods. Its account places those electric-powertrain categories under AIS-038 Revision 2. It describes the L category separately, including vehicles with fewer than four wheels and quadricycles.
The same answer records implementation from 1 December 2022, with some clauses taking effect on 31 March 2023. These dates describe stages in the standards framework. They are not a battery manufacture date, warranty start date or an instruction to replace every battery already on the road.
The December 2022 parliamentary answer is useful for checking that background. For a passenger-car document, an unexplained reference to the scooter-oriented standard is a reason to ask the supplier to identify the correct category and approval, rather than assuming every EV uses identical certification paperwork.
What the ministry says is tested
In December 2025, Heavy Industries said EV prototypes and components are tested for protection against overcharge and discharge, excessive current and short circuits, excessive temperature, voltage cut-off and the battery management system. Its explanation again identifies AIS-038 Revision 2 for the M and N categories.
The ministry also lists separate BIS standards. These include IS 18237:2023 for lithium cells and batteries during transport, IS 16893 Part 2:2018 for reliability and abuse testing of propulsion cells, and Part 3:2018 for cell safety requirements. The titles describe different scopes, so a cell-test reference and a vehicle approval should not be treated as interchangeable documents.
Those details appear in the official December 2025 statement. For owners, the practical question is which component or vehicle the document covers. A certificate mentioning lithium batteries in general does not, on its own, identify the approval status of a particular electric car.
Approval is a process with an identified testing agency
A July 2026 Heavy Industries reply explains that Rule 126 requires every vehicle manufacturer or importer, including EV manufacturers or importers, to submit a prototype to a notified testing agency. The agency issues a Type Approval Certificate certifying compliance with the Motor Vehicles Act and the Central Motor Vehicles Rules.
That official explanation of prototype approval establishes the role of the agency and certificate. It is not a report on the service condition of an individual customer's battery. If a car develops a fault, its diagnostic assessment and the manufacturer's service response remain necessary even when the design has approval.
When examining a technical claim, note the standard, revision, product identity and issuer together. Retain the source document instead of relying on a cropped certification badge. This makes it easier to distinguish a manufacturer statement, a component test and the approval of the vehicle itself.
Compliance references also appear in scheme documents
A Heavy Industries memorandum dated 6 September 2023 addresses vehicles incentivised under PLI-Auto and FAME-II. From 1 October 2023, it directs compliance with the strengthened standards, referring to amendment 3 of AIS-156 and AIS-038 Revision 2. This scheme-specific memorandum is historical evidence about incentive compliance. It should not be used as a statement that every passenger car on sale receives a purchase subsidy.
Range measurement answers a different question
The government's August 2025 standardisation reply separately lists AIS-039 for electrical energy consumption and AIS-040 for range measurement. Its BIS annexure also identifies IS 17191 Part 2:2019 for measuring electric-powertrain range. Safety compliance and a published range figure therefore point to different assessment questions.
The standardisation reply should help readers organise technical documents: ask what each reference measures before using it to compare cars. A higher range claim does not by itself answer the battery safety-certification question.
For model-level context, our Ather 450 price in your city: 450S from Rs 98,888 in Delhi, Rs 1,35,999 in Bengaluru and Ather 450S at Rs 1,35,999, 450X at Rs 1,48,998: range and features compared concern different evidence. The Ather Konarc price in your city: Rs 80,000 in Delhi, Rs 99,999 in Bengaluru addresses another part of ownership. Keep equipment, crash results, battery certification and charging costs distinct when reading a vehicle dossier.
Official source: Heavy Industries explanation of EV battery standards and protection tests.








