NEW DELHI: The Zeb 16PG2UG1UF 300 costs Rs 14,999 on Zebronics' official site, while the larger Zeb 24PG2UG2UF 300 is listed at Rs 31,999. The comparison is relevant to larger home and residential CCTV networks: the larger switch provides more powered camera connections, but both listings specify the same total power budget.

ItemOfficial listing
16PG2UG1UF 300Rs 14,999; 16 x 10/100/1000M PoE ports
24PG2UG2UF 300Rs 31,999; 24 x 10/100/1000M PoE ports
Both models2 x 1000M Ethernet uplinks; 300W total budget; up to 30W per port
Extended-distance conditionUp to 250 metres at 10M over Cat.6
24-port optical provision2 x 1000M SFP in connector table

Price as of 20 November 2026, 10:56 IST. Zebronics lists these prices with tax included.

More connections, unchanged total power

Zebronics' official specifications list Gigabit-capable PoE camera ports on both products. This separates them from switches whose uplink is Gigabit but whose camera sockets are slower. A camera still needs its own compatible Ethernet interface, and a fast socket is not a promise about internet speed, recording quality or the performance of the complete surveillance system.

The equal power budgets are the most consequential point in this pair. Adding powered ports does not increase the amount of power available across the entire switch. For an apartment association expanding coverage, it would be a mistake to approve the larger model merely because the planned camera count fits its front panel.

A useful tender or installation quotation should list each proposed powered device and its rated demand. The installer can then check both the per-port ceiling and the combined load. Keep that schedule with the handover documents so that a later camera replacement is assessed against the original power design, rather than treated as an interchangeable addition.

Map the recorder and uplinks separately

Both product pages identify separate Gigabit Ethernet uplinks. These connections need a purpose in the proposed layout: for example, the path to recording hardware or another section of the network. Do not infer that multiple uplinks automatically combine their capacity. The official pages do not establish such a configuration for these unmanaged switches.

The larger model's connector specification explicitly lists its optical sockets. The smaller model has inconsistent wording between its feature list and connector table about SFP provision. This comparison therefore does not assign a confirmed optical-port count to the smaller unit. If fibre is essential, get the exact hardware configuration confirmed against the supplied product before the order is finalised.

That qualification matters in a building where the switch location is fixed by an existing riser or security room. A copper-only design and a design using fibre can require different supporting equipment. The price table should not be used as a complete optical-network quotation, and the presence of an SFP connection does not confirm that an optical module is included.

Extended reach has a speed condition

The extended-distance specification is tied to a slower transmission mode over Cat.6. This should be treated as a specific operating condition, not a general promise that every camera can run at Gigabit speed over the maximum advertised distance. Ask for the cable route and link mode to be marked on the final installation drawing.

For a residential compound, the practical issue is often the route to a boundary camera rather than the distance inside the security room. Test live viewing and playback from that camera after installation. A specification sheet cannot establish whether a particular cable run, termination or chosen camera will work satisfactorily at your site.

The mounting arrangements also deserve a place in the quotation. Zebronics lists mounting kits with these switches. Check the intended cabinet location, cable access and service clearance before installation. A physically suitable shelf or rack position is part of the design, especially when power cords and camera cables must remain identifiable for future maintenance.

What the higher price does not settle

Neither listing supplies a complete camera package or a retention guarantee. Those depend on the recording hardware, storage and configured streams. Additional switch ports can help organise an expanded network, but they do not create recorder channels or disk capacity. Confirm those separate constraints before approving a larger switch for future growth.

Our Zeb IP recorder guide provides related recording context. The Zeb 8PPG2UGS switch guide covers a different scale of installation, while the Zeb IP camera comparison addresses the camera end. None of these products is included in the switch prices quoted here.

The sensible handover is a working network diagram, an equipment inventory and a demonstration of recording after power is restored. Also ask which component is responsible for remote access and who retains its configuration details. These checks make the comparison useful beyond the headline port count, without claiming performance or security testing that has not been carried out.

The lower-priced unit and the larger unit should therefore be evaluated against different connection requirements, while applying the same discipline to total power. Both are listed as unmanaged PoE switches. The official figures establish their advertised hardware limits and prices, not a recommendation to replace an existing functioning installation.

Official sources: Zebronics 16PG2UG1UF 300 product page, Zebronics 24PG2UG2UF 300 product page.