NEW DELHI: Zebronics lists the five-port Zeb ETS5G at Rs 1,599 and the eight-port Zeb ETS8G at Rs 2,499, including tax. Both are wired Gigabit Ethernet switches. The choice is principally about how many cable connections the room needs, while leaving enough room for the connection back to the existing network.
| Item | Official listing |
|---|---|
| ETS5G, five Gigabit ports | Rs 1,599, tax included |
| ETS8G, eight Gigabit ports | Rs 2,499, tax included |
| Switching bandwidth | ETS5G: 10Gbps; ETS8G: 16Gbps |
| Power input, both models | DC 5V, 2A |
| Design, both models | Fanless; plug and play |
Price as of 20 November 2026, 00:02 IST.
What the two prices cover
According to Zebronics' official ETS5G and ETS8G product pages, both models offer automatic link negotiation and automatic MDI/MDIX. The table covers the two models examined here. They are separate port-count choices, rather than colour or storage variants, and neither page presents a further priced configuration for that model.
For a household adding a television, a workstation and a recorder in the same corner, drawing the cable layout first is more useful than choosing the largest number on the box. Write down every wired device, then mark the route back to the router. A switch needs that upstream connection if its attached devices are to reach the rest of the home network.
Count usable connections at the installation point
The upstream cable occupies a socket too. That is the practical reason a small switch can fill up sooner than expected: its labelled port count includes the connection serving the rest of the network. Keep a spare connection in the drawing if a future television box, access point or storage device is likely to be added nearby.
This is also why the smaller and larger models belong in the same buying discussion. The ETS5G suits a deliberately limited cluster of wired equipment. The ETS8G offers more physical sockets where cables already converge. Paying for extra sockets has a clear purpose when the layout needs them, but does not by itself improve a device that already has a satisfactory connection.
What Gigabit does and does not describe
Gigabit here describes the Ethernet links. The advertised switching bandwidth is an internal switch specification, distinct from the broadband plan and from the speed of any individual internet download. A slow service connection, a slower port on the router or an older attached device can still constrain the route used by an application.
Before replacing equipment, identify the bottleneck being addressed. Running out of router sockets is a different problem from weak wireless reception in a bedroom. These switches provide cable connections. A wireless coverage problem calls for a separate assessment of access-point placement, the backhaul route and the construction between rooms.
Placement, power and everyday checks
The fanless design is relevant when the switch sits beside a television or desk. Plan a ventilated position with enough clearance for cable plugs and the power lead. Avoid treating the compact enclosure as something that can disappear beneath a tightly packed pile of adapters, where it becomes difficult to inspect or disconnect.
The official package lists include a power adapter and QR code guide. Keep the supplied adapter identifiable, especially where several similar low-voltage supplies share a socket board. The published input requirement should be checked before substituting another supply; a connector fitting physically does not establish that its electrical output is appropriate.
Labeling both ends of cables can make later troubleshooting much easier. If a connected device loses access, check whether the fault affects only that device or everything behind the switch. That distinction helps separate a local cable problem from a failed upstream connection without changing unrelated settings across the whole home network.
Rivals and the right buying question
The closest verified alternative in this comparison is the other ETS model. A PoE switch is a different option when the installation needs compatible equipment powered through Ethernet. Do not assume that an ordinary Ethernet switch supplies camera power merely because its connectors resemble those on a PoE product.
For a home with an existing CCTV recorder, keep data connectivity and camera power as separate lines in the installation plan. The recorder may need a network connection even where cameras receive power elsewhere. Buying a switch around that actual arrangement avoids paying for features the installation cannot use.
Before ordering, retain the model name, listed price and invoice description. Ask the seller to identify the exact supplied model if a listing groups several switch sizes together. The useful outcome is a clear connection plan with suitable power and a little expansion space, rather than a purchase based only on the word Gigabit.
Related reading: NETWIZ300A router guide, 8PPG2UGS PoE network guide, 10-channel NVR guide.
Official sources: Zebronics product page, Zebronics comparison source.









